|
First you have to get the gauges, there are several ways of going about this, you can make them or buy them from gojeep
(see links) I chose to buy them. They are 10 dollars, when he receives the money, he emails you a .pdf file that you
need to print on HIGH quality photo paper with a high quality printer. Then you cut them out very carefully with an
exacto knife. The next procedures are actually installing the gauges: Take the big dash cover off the front of
the dash you will need to loosen two top screws and about 4 or so bottom ones that also secure the bottom dash part.
Then you need to take the glass/gauge surround off, there are 8 screws all together that need to be removed to accomplish
this. Then you very carefully slide the gauges over the gauge needles, then install everything in the order you removed
them! Your done! This is a great looks mod and I think that it enhances your night time reading of the gauges ability.
|
